Open On-Chip Debugger
The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. Built with support for FT2232-based programmers by default. See variants for programmer options.
The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. Built with support for FT2232-based programmers by default. See variants for programmer options.
+ Show more
Version: 0.12.0
License: GPLGitHub
Please wait while tickets are being fetched from Trac.
Maintainers
nerdling
Categories
devel
cross
Homepage
http://openocd.sourceforge.net/
Platforms
darwin
Variants
amtjtagaccel
(Enable building the Amontec JTAG-Accelerator driver)
arm_jtag_ew
(Enable building support for the Olimex ARM-JTAG-EW Programmer)
at91rm9200
(Enable building support for AT91RM9200 based SBCs)
buspirate
(Enable building support for the Buspirate)
cmsis
(Enable building support for the cmsis-dap)
dummy
(Enable building the dummy port driver)
ecosboard
(Enable building support for eCos based JTAG debugger)
ep93xx
(Enable building support for EP93xx based SBCs)
ft2232
(Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX)
ft2232_ftd2xx
(Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com)
ftdi
(Enable building OpenOCD's built-in FTDI driver.)
gw16012
(Enable building support for the Gateworks GW16012 JTAG Programmer)
ioutil
(Enable ioutil functions - useful for standalone OpenOCD implementations)
jlink
(Enable building support for the Segger J-Link JTAG Programmer)
oocd_trace
(Enable building support for some prototype OpenOCD+trace ETM capture hardware)
parport
(Enable building the pc parallel port driver. WARNING: not supported on OS X.)
presto
(Enable building support for ASIX Presto Programmer using the libftdi driver)
presto_ftd2xx
(Enable building support for ASIX Presto Programmer using the FTD2XX driver)
remote_bitbang
(Enable building support for the Remote Bitbang jtag driver)
rlink
(Enable building support for the Raisonance RLink JTAG Programmer)
stlink
(Enable building support for the STM ST-link)
ti
(TI-ICDI interface on Stellaris Launchpad)
ulink
(Enable building support for the Keil ULINK JTAG Programmer)
usb_blaster
(Enable building support for the Altera USB-Blaster using the libftdi driver, opensource alternate of FTD2XX)
usb_blaster_ftd2xx
(Enable building support for the Altera USB-Blaster using the FTD2XX driver from ftdichip.com)
usbprog
(Enable building support for the usbprog JTAG Programmer)
vsllink
(Enable building support for the Versaloon-Link JTAG Programmer)
zy1000
(Enable ZY1000 interface. WARNING: Using the minidriver disables all other drivers.)
"openocd" depends on
lib (1) build (2) Ports that depend on "openocd"
No ports
Port Health:
Installations (30 days)
5
Requested Installations (30 days)
5
GitHub
Loading Port Health