openocd (cross/openocd) Add to my watchlist

Open On-Chip Debugger

The Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system programming and boundary-scan testing for embedded target devices. Built with support for FT2232-based programmers by default. See variants for programmer options.

Version: 0.11.0 License: GPL GitHub
Maintainers nerdling
Categories devel cross
Homepage http://openocd.sourceforge.net/
Platforms darwin
Variants
  • amtjtagaccel (Enable building the Amontec JTAG-Accelerator driver)
  • arm_jtag_ew (Enable building support for the Olimex ARM-JTAG-EW Programmer)
  • at91rm9200 (Enable building support for AT91RM9200 based SBCs)
  • buspirate (Enable building support for the Buspirate)
  • cmsis (Enable building support for the cmsis-dap)
  • dummy (Enable building the dummy port driver)
  • ecosboard (Enable building support for eCos based JTAG debugger)
  • ep93xx (Enable building support for EP93xx based SBCs)
  • ft2232 (Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX)
  • ft2232_ftd2xx (Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com)
  • ftdi (Enable building OpenOCD's built-in FTDI driver.)
  • gw16012 (Enable building support for the Gateworks GW16012 JTAG Programmer)
  • ioutil (Enable ioutil functions - useful for standalone OpenOCD implementations)
  • jlink (Enable building support for the Segger J-Link JTAG Programmer)
  • oocd_trace (Enable building support for some prototype OpenOCD+trace ETM capture hardware)
  • parport (Enable building the pc parallel port driver. WARNING: not supported on OS X.)
  • presto (Enable building support for ASIX Presto Programmer using the libftdi driver)
  • presto_ftd2xx (Enable building support for ASIX Presto Programmer using the FTD2XX driver)
  • rlink (Enable building support for the Raisonance RLink JTAG Programmer)
  • stlink (Enable building support for the STM ST-link)
  • ti (TI-ICDI interface on Stellaris Launchpad)
  • ulink (Enable building support for the Keil ULINK JTAG Programmer)
  • universal (Build for multiple architectures)
  • usb_blaster (Enable building support for the Altera USB-Blaster using the libftdi driver, opensource alternate of FTD2XX)
  • usb_blaster_ftd2xx (Enable building support for the Altera USB-Blaster using the FTD2XX driver from ftdichip.com)
  • usbprog (Enable building support for the usbprog JTAG Programmer)
  • vsllink (Enable building support for the Versaloon-Link JTAG Programmer)
  • zy1000 (Enable ZY1000 interface. WARNING: Using the minidriver disables all other drivers.)

"openocd" depends on

lib (1)
build (2)

Ports that depend on "openocd"

No ports


Port Health:

Loading Port Health

Installations (30 days)

6

Requested Installations (30 days)

6