{"count":53704,"next":"https://ports.macports.org/api/v1/ports/?format=json&ordering=updated_at&page=371","previous":"https://ports.macports.org/api/v1/ports/?format=json&ordering=updated_at&page=369","results":[{"name":"whatmask","portdir":"net/whatmask","version":"1.2","license":"GPL-2+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://www.laffeycomputer.com/whatmask.html","description":"Easily convert between three common subnet mask notations","long_description":"Notations supported:\n \n Name\t\t\tExample\n ---------------------------------\n CIDR\t\t\t/24\n Netmask\t\t\t255.255.255.0\n Wilcard Bits\t\t0.0.0.255\n \n The above notations are all identical. CIDR notation commonly has a / in front of the number (representing the number of bits). Whatmask can accept these notations with or without a slash.\n \n Netmask notation is pretty much the standard old-school way of doing it.\n \n Wilcard bits are similar to the netmask, but they are the logical not of the netmask. This notation is used by a number of popular routers.","active":true,"categories":["net"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]}],"depends_on":[]},{"name":"whois","portdir":"net/whois","version":"5.6.5","license":"GPL-2+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://github.com/rfc1036/whois","description":"A replacement whois client","long_description":"whois is an improved whois client that follows the delegations from the Verisign whois server.","active":true,"categories":["net"],"maintainers":[{"name":"ryandesign","github":"ryandesign","ports_count":2142}],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18","pkgconfig","bash-completion","perl5.34"]},{"type":"extract","ports":["xz"]},{"type":"lib","ports":["gettext","libidn2","libiconv"]}],"depends_on":[]},{"name":"wire","portdir":"net/wire","version":"2014.04.22","license":"BSD","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://wired.read-write.fr/products/wire","description":"wire is an UNIX command-line client for the Wired 2.0 protocol","long_description":"wire is an UNIX command-line client for the Wired 2.0 protocol","active":true,"categories":["net"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["autoconf","automake","libtool","pkgconfig","clang-18"]},{"type":"lib","ports":["libxml2","sqlite3","libwired","ncurses","openssl10","readline","libiconv"]}],"depends_on":[]},{"name":"wireguard-go","portdir":"net/wireguard-go","version":"0.0.20250522","license":"GPL-2","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://www.wireguard.com/","description":"Userspace Go implementation of WireGuard VPN","long_description":"WireGuard-go is the userspace Go implementation of WireGuard, a novel VPN that runs inside the Linux Kernel and utilizes state-of-the-art cryptography. It aims to be faster, simpler, leaner, and more useful than IPSec, while avoiding the massive headache. It intends to be considerably more performant than OpenVPN. WireGuard is designed as a general purpose VPN for running on embedded interfaces and super computers alike, fit for many different circumstances. It runs over UDP.","active":true,"categories":["net"],"maintainers":[{"name":"cardi","github":"cardi","ports_count":9}],"variants":[],"dependencies":[{"type":"build","ports":["go","clang-18"]},{"type":"extract","ports":["xz"]}],"depends_on":[{"type":"run","ports":["wireguard-tools"]}]},{"name":"wired-server","portdir":"net/wired-server","version":"2.5.2","license":"BSD","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://wired.read-write.fr/products/wired","description":"Wired Server is BBS-oriented server for UNIX-based operating systems","long_description":"Wired Server is BBS-oriented server for UNIX-based operating systems","active":true,"categories":["net"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["autoconf","automake","libtool","pkgconfig","clang-18"]},{"type":"lib","ports":["libiconv","zlib","libwired","libxml2","sqlite3","ncurses","openssl10","miniupnpc"]}],"depends_on":[]},{"name":"wireguard-tools","portdir":"net/wireguard-tools","version":"1.0.20260223","license":"GPL-2","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://www.wireguard.com/","description":"Tools for the WireGuard VPN","long_description":"wireguard-tools contains command-line tools to interact with the userspace Go implementation of WireGuard. Currently there are two tools: wg, to set and retrieve configuration of WireGuard interfaces, and wg-quick, set up a WireGuard interface simply.","active":true,"categories":["net"],"maintainers":[{"name":"cardi","github":"cardi","ports_count":9}],"variants":[],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"extract","ports":["xz"]},{"type":"run","ports":["wireguard-go","bash"]}],"depends_on":[]},{"name":"wireshark-chmodbpf","portdir":"net/wireshark-chmodbpf","version":"1.1","license":"(GPL-2 or GPL-3)","platforms":"any","epoch":0,"replaced_by":null,"homepage":"https://www.wireshark.org","description":"Enable Wireshark to acces macOS capture devices.","long_description":"An access_bpf group will be created and its members allowed access to BPF devices at boot to allow unprivileged packet captures. It is meant to support Wireshark where unprivileged access to macOS packet capture devices is desired.","active":true,"categories":["net"],"maintainers":[{"name":"ra1nb0w","github":"ra1nb0w","ports_count":151},{"name":"opendarwin.org","github":"ghosthound","ports_count":8}],"variants":[],"dependencies":[{"type":"build","ports":["clang-18"]}],"depends_on":[{"type":"run","ports":["wireshark4","wireshark2","wireshark22","wireshark3","wireshark30"]}]},{"name":"wireshark2","portdir":"net/wireshark2","version":"2.6.20","license":"(GPL-2 or GPL-3)","platforms":"{darwin < 19}","epoch":0,"replaced_by":null,"homepage":"https://www.wireshark.org/","description":"Graphical network analyzer and capture tool","long_description":"A network analyzer that lets you capture and interactively browse Ethernet frames. Packet data can be read from a file, or live from a local network interface.","active":true,"categories":["net"],"maintainers":[{"name":"opendarwin.org","github":"ghosthound","ports_count":8}],"variants":["debug","qt4","qt5","no_gui","adns","portaudio","zlib","lua","libsmi","gnutls","libgcrypt","cares","kerberos5","geoip","chmodbpf","universal"],"dependencies":[{"type":"build","ports":["clang-18","cmake","pkgconfig","python311"]},{"type":"extract","ports":["xz"]},{"type":"lib","ports":["lz4","zlib","portaudio","glib2","gnutls","libgcrypt","qt5-qtbase","openssl","c-ares","kerberos5","libpcap","libsmi","libgeoip","qt5-qtsvg","qt5-qtmacextras","qt5-qtmultimedia","qt5-qttranslations"]},{"type":"run","ports":["wireshark-chmodbpf"]}],"depends_on":[]},{"name":"wireshark22","portdir":"net/wireshark22","version":"2.2.17","license":"(GPL-2 or GPL-3)","platforms":"{darwin < 16}","epoch":0,"replaced_by":null,"homepage":"https://www.wireshark.org/","description":"Graphical network analyzer and capture tool","long_description":"A network analyzer that lets you capture and interactively browse Ethernet frames. Packet data can be read from a file, or live from a local network interface.","active":true,"categories":["net"],"maintainers":[{"name":"opendarwin.org","github":"ghosthound","ports_count":8}],"variants":["debug","qt4","qt5","gtk2","gtk3","no_gui","adns","portaudio","zlib","lua","libsmi","gnutls","libgcrypt","cares","kerberos5","geoip","chmodbpf","universal"],"dependencies":[{"type":"build","ports":["clang-18","cmake","pkgconfig"]},{"type":"lib","ports":["glib2","gnutls","libgcrypt","libgeoip","openssl","qt4-mac","kerberos5","libpcap","libsmi","c-ares","zlib","portaudio"]},{"type":"run","ports":["wireshark-chmodbpf"]}],"depends_on":[]},{"name":"wireshark3","portdir":"net/wireshark3","version":"3.6.8","license":"(GPL-2 or GPL-3)","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://www.wireshark.org/","description":"Graphical network analyzer and capture tool","long_description":"A network analyzer that lets you capture and interactively browse Ethernet frames. Packet data can be read from a file, or live from a local network interface.","active":true,"categories":["net"],"maintainers":[{"name":"opendarwin.org","github":"ghosthound","ports_count":8}],"variants":["debug","qt5","no_gui","adns","zlib","minizip","lua","libsmi","gnutls","cares","kerberos5","geoip","chmodbpf","python310","python311","universal"],"dependencies":[{"type":"build","ports":["clang-18","qt5-qttools","cmake","pkgconfig","python311"]},{"type":"extract","ports":["xz"]},{"type":"lib","ports":["zlib","glib2","gnutls","libgcrypt","libgeoip","libssh","qt5-qtbase","c-ares","kerberos5","libpcap","libsmi","openssl","qt5-qtsvg","qt5-qtmacextras","qt5-qtmultimedia","qt5-qttranslations","lz4"]},{"type":"run","ports":["wireshark-chmodbpf"]}],"depends_on":[{"type":"lib","ports":["gr37-lora-rpp0","gr-lora-rpp0"]},{"type":"run","ports":["py39-pyshark","py38-pyshark","termshark","nsm-console"]}]},{"name":"wireshark30","portdir":"net/wireshark30","version":"3.0.9","license":"(GPL-2 or GPL-3)","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://www.wireshark.org/","description":"Graphical network analyzer and capture tool","long_description":"A network analyzer that lets you capture and interactively browse Ethernet frames. Packet data can be read from a file, or live from a local network interface.","active":true,"categories":["net"],"maintainers":[{"name":"opendarwin.org","github":"ghosthound","ports_count":8}],"variants":["debug","qt5","no_gui","adns","zlib","minizip","lua","libsmi","gnutls","cares","kerberos5","geoip","chmodbpf","python35","python36","python37","universal"],"dependencies":[{"type":"build","ports":["clang-18","cmake","pkgconfig","python37"]},{"type":"extract","ports":["xz"]},{"type":"lib","ports":["lz4","zlib","glib2","gnutls","libgcrypt","libgeoip","qt5-qtbase","c-ares","kerberos5","libpcap","libsmi","openssl","qt5-qtsvg","qt5-qtmacextras","qt5-qtmultimedia","qt5-qttranslations"]},{"type":"run","ports":["wireshark-chmodbpf"]}],"depends_on":[]},{"name":"wirouterkeyrec","portdir":"net/wirouterkeyrec","version":"1.1.2","license":"GPL-2+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://www.salvatorefresta.net","description":"Recover the default WPA passphrases of the supported router models","long_description":"WiRouter KeyRec is a powerful and platform independent software to recover the default WPA passphrases of the supported router models (Telecom Italia Alice AGPF, Fastweb Pirelli, Fastweb Tesley, Eircom Netopia, Pirelli TeleTu/Tele 2).","active":true,"categories":["net"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"extract","ports":["unzip"]}],"depends_on":[]},{"name":"wol","portdir":"net/wol","version":"0.7.1","license":"GPL-2+","platforms":"darwin freebsd","epoch":0,"replaced_by":null,"homepage":"http://wake-on-lan.sourceforge.net","description":"Wake-On-Lan command line application","long_description":"wol can send a Wake-On-Lan magic packet to a target ethernet address","active":true,"categories":["net"],"maintainers":[{"name":"jeremyhu","github":"jeremyhu","ports_count":305}],"variants":["universal"],"dependencies":[{"type":"build","ports":["autoconf","automake","libtool","clang-18"]}],"depends_on":[]},{"name":"wormhole-william","portdir":"net/wormhole-william","version":"1.0.8","license":"MIT","platforms":"darwin freebsd linux","epoch":0,"replaced_by":null,"homepage":"https://github.com/psanford/wormhole-william","description":"Go implementation of magic wormhole.","long_description":"wormhole-william is a go (golang) implementation of magic wormhole. It provides secure end-to-end encrypted file transfers between computers. The endpoints are connected using the same wormhole code. \n\nwormhole-william is compatible with the official python magic wormhole cli tool.","active":true,"categories":["net"],"maintainers":[{"name":"","github":"jasperweiss","ports_count":1}],"variants":[],"dependencies":[{"type":"build","ports":["go","clang-18"]}],"depends_on":[]},{"name":"wput","portdir":"net/wput","version":"0.6.2","license":"GPL-2+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://wput.sourceforge.net/","description":"wput is like wget but is for uploading files to ftp-servers","long_description":"wput is a tiny program that looks like wget and is designed to upload files or whole directories to remote ftp-servers","active":true,"categories":["net"],"maintainers":[],"variants":["ssl","universal"],"dependencies":[{"type":"build","ports":["automake","clang-18"]},{"type":"lib","ports":["libiconv","gettext-runtime"]}],"depends_on":[]},{"name":"wrk","portdir":"net/wrk","version":"4.2.0","license":"Apache-2","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://github.com/wg/wrk","description":"wrk HTTP benchmarking tool","long_description":"wrk is a modern HTTP benchmarking tool with optional LuaJIT HTTP request generation.","active":true,"categories":["net"],"maintainers":[{"name":"","github":"jlopezr","ports_count":1}],"variants":[],"dependencies":[{"type":"build","ports":["pkgconfig","perl5","clang-18"]},{"type":"lib","ports":["luajit","openssl3"]}],"depends_on":[]},{"name":"xinetd","portdir":"net/xinetd","version":"2.3.15.4","license":"Restrictive/Distributable and BSD and MIT and ISC","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://web.archive.org/web/20130629172033/http://www.xinetd.org/","description":"xinetd is a secure replacement for inetd","long_description":"xinetd is a secure replacement for inetd","active":true,"categories":["net"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"extract","ports":["xz"]}],"depends_on":[]},{"name":"xprobe2","portdir":"net/xprobe2","version":"0.3","license":"unknown","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://xprobe.sourceforge.net","description":"Remote, active OS fingerprinting tool","long_description":"The purpose of the tool is to perform ICMP fingerprinting of remote TCP/IP stacks based on Ofir Arkin's ICMP fingerprinting. This tool is a practical implementation of results discovered during 'project X' (see http://www.sys-security.com/html/projects/X.html).","active":true,"categories":["net","security"],"maintainers":[{"name":"normen","github":"Gminfly","ports_count":11}],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["libpcap"]}],"depends_on":[]},{"name":"yafc","portdir":"net/yafc","version":"1.3.7","license":"(GPL-2+ or OpenSSLException)","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://github.com/sebastinas/yafc","description":"yafc is yet another ftp client","long_description":"yafc is yet another ftp client featuring cached directory listings, extensive tab completion, aliases, colored ls (i.e. ls --color, uses $LS_COLORS like GNU ls), automatic reconnect on timed out connections, recursive get/put/fxp/ls/rm, nohup mode transfers, multiple connections open simultaneously, tagging (queueing), very configurable, autologin and bookmarks, automagically enters nohup-mode when SIGHUP received (in get and put), redirection to local command or file, proxy support, Kerberos support (version 4 and 5, heimdal, kth-krb or MIT), SSH2 support (sftp).","active":true,"categories":["net"],"maintainers":[],"variants":["heimdal","universal"],"dependencies":[{"type":"build","ports":["pkgconfig","clang-18"]},{"type":"extract","ports":["xz"]},{"type":"lib","ports":["libssh","kerberos5","openssl","readline"]}],"depends_on":[]},{"name":"yardradius","portdir":"net/yardradius","version":"1.0.21","license":"BSD and BSD-old","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://yardradius.sourceforge.net/","description":"yardradius is yet another radius server","long_description":"yardradius is yet another radius server","active":true,"categories":["net"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["gdbm"]}],"depends_on":[]},{"name":"yaz","portdir":"net/yaz","version":"5.35.1","license":"BSD","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://www.indexdata.com/resources/software/yaz/","description":"toolkit for Z39.50/SRW/SRU clients and servers","long_description":"YAZ is a compact toolkit that provides access to the Z39.50 and SRW/SRU protocols, as well as a set of higher-level tools for implementing the server and client roles, respectively.","active":true,"categories":["devel","net","databases"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["pkgconfig","clang-18"]},{"type":"lib","ports":["gnutls","icu","ncurses","zlib","libiconv","libxml2","libxslt","readline","hiredis"]}],"depends_on":[{"type":"lib","ports":["p5.26-net-z3950-zoom","pazpar2","zebra","tellico","metaproxy","yazpp","p5.28-net-z3950-zoom","p5.30-net-z3950-zoom","p5.32-net-z3950-zoom","p5.34-net-z3950-zoom","php53-yaz","php54-yaz","php55-yaz","php56-yaz","php70-yaz","php71-yaz","php72-yaz","php73-yaz","php74-yaz","php80-yaz","php81-yaz","php82-yaz","php83-yaz","php84-yaz","php85-yaz"]}]},{"name":"yazpp","portdir":"net/yazpp","version":"1.9.0","license":"BSD","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://www.indexdata.com/yazpp","description":"C++ API for Yaz toolkit for Z39.50/SRW/SRU clients and servers","long_description":"YAZ is a compact toolkit that provides access to the Z39.50 and SRW/SRU protocols, as well as a set of higher-level tools for implementing the server and client roles, respectively. This is the C++ API.","active":true,"categories":["devel","net","databases"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["yaz"]}],"depends_on":[{"type":"lib","ports":["metaproxy","yazproxy"]}]},{"name":"yazproxy","portdir":"net/yazproxy","version":"1.3.12","license":"GPL-2","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://www.indexdata.com/yazproxy","description":"Proxy server for Z39.50/SRW/SRU clients and servers","long_description":"YAZ Proxy is highly configurable and can be used in a number of different applications, ranging from debugging Z39.50-based applications and protecting overworked servers, to improving the performance of stateless WWW/Z39.50 gateways.","active":true,"categories":["devel","net","databases"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["yazpp"]}],"depends_on":[]},{"name":"yersinia","portdir":"net/yersinia","version":"0.8.2","license":"unknown","platforms":"darwin freebsd","epoch":0,"replaced_by":null,"homepage":"https://github.com/tomac/yersinia","description":"Solid framework for analyzing and testing the deployed networks and systems.","long_description":"Yersinia is a network tool designed to take advantage of some weakeness in different network protocols. It pretends to be a solid framework for analyzing and testing the deployed networks and systems. Currently, there are some network protocols implemented, but others are coming (tell us which one is your preferred). Attacks for the following network protocols are implemented (but of course you are free for implementing new ones): Spanning Tree Protocol (STP) Cisco Discovery Protocol (CDP) Dynamic Trunking Protocol (DTP) Dynamic Host Configuration Protocol (DHCP) Hot Standby Router Protocol (HSRP) IEEE 802.1Q IEEE 802.1X Inter-Switch Link Protocol (ISL) VLAN Trunking Protocol (VTP)","active":true,"categories":["net","security"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["ncurses","libnet","libpcap"]}],"depends_on":[]},{"name":"yewtube","portdir":"net/yewtube","version":"2.12.0","license":"GPL-3","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://github.com/mps-youtube/yewtube","description":"Terminal-based YouTube player and downloader","long_description":"Terminal-based YouTube player and downloader. No Youtube API key required.","active":true,"categories":["net","multimedia"],"maintainers":[],"variants":[],"dependencies":[{"type":"build","ports":["py312-build","py312-installer","py312-setuptools","py312-wheel","clang-18"]},{"type":"lib","ports":["youtube-search-python","desktop-file-utils","py312-pylast","yt-dlp","python312","py312-requests","py312-pyperclip"]}],"depends_on":[]},{"name":"yggdrasil-go","portdir":"net/yggdrasil-go","version":"0.5.12","license":"LGPL-3","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://github.com/yggdrasil-network/yggdrasil-go","description":"An experiment in scalable routing as an encrypted IPv6 overlay network","long_description":"Yggdrasil is an early-stage implementation of a fully end-to-end encrypted IPv6 network. It is lightweight, self-arranging, supported on multiple platforms and allows pretty much any IPv6-capable application to communicate securely with other Yggdrasil nodes.","active":true,"categories":["net"],"maintainers":[{"name":"l2dy","github":"l2dy","ports_count":97}],"variants":[],"dependencies":[{"type":"build","ports":["go","clang-18"]}],"depends_on":[]},{"name":"youtube-search-python","portdir":"net/youtube-search-python","version":"1.6.6","license":"MIT","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://github.com/alexmercerind/youtube-search-python","description":"Search for YouTube videos, channels & playlists","long_description":"Search for YouTube videos, channels & playlists","active":true,"categories":["net","multimedia","python"],"maintainers":[],"variants":[],"dependencies":[{"type":"build","ports":["py312-installer","py312-wheel","clang-18","py312-build","py312-setuptools"]},{"type":"lib","ports":["py312-httpx","python312"]}],"depends_on":[{"type":"lib","ports":["yewtube"]}]},{"name":"youtube-upload","portdir":"net/youtube-upload","version":"0.8.0","license":"GPL-3+","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://github.com/tokland/youtube-upload","description":"script to upload videos to YouTube","long_description":"youtube-upload is a command-line script that uploads videos to YouTube.","active":true,"categories":["net"],"maintainers":[{"name":"ryandesign","github":"ryandesign","ports_count":2142}],"variants":["python27"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["python27","py27-curl","py27-gdata","py27-progressbar"]}],"depends_on":[]},{"name":"ytalk","portdir":"net/ytalk","version":"3.3.0","license":"GPL-2+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://www.impul.se/ytalk/","description":"multi-user talk client","long_description":"YTalk is a compatible replacement for the BSD talk(1) program. The main advantage of YTalk is the ability to communicate with any arbitrary number of users at once. It supports both talk protocols (talk and ntalk) and can communicate with several different talk daemons at the same time. You may also spawn a command shell in your talk window and let other users watch. YTalk supports a basic set of VT100 control codes, as well as job control (BSD support added in 3.1.3).","active":true,"categories":["net"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]}],"depends_on":[]},{"name":"zsync","portdir":"net/zsync","version":"0.6.2","license":"Artistic-2 and Zlib","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://zsync.moria.org.uk/","description":"file transfer program","long_description":"zsync file transfer program. It allows you to download a file from a remote web server, where you have a copy of an older version of the file on your computer already. zsync downloads only the new parts of the file. It uses the same algorithm as rsync.","active":true,"categories":["net"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]}],"depends_on":[]},{"name":"PlopFolio","portdir":"news/PlopFolio","version":"0.1.0","license":"GPL-2+","platforms":"macosx","epoch":0,"replaced_by":null,"homepage":"http://www.collaboration-world.com/plopfolio/","description":"PlopFolio is a free KlipFolio clone that supports Klips","long_description":"PlopFolio is a free clone of Serences KlipFolio application. PlopFolio supports Klips available from KlipFarm (http://www.klipfarm.com/).","active":true,"categories":["aqua","news"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]}],"depends_on":[]},{"name":"hellanzb","portdir":"news/hellanzb","version":"0.13","license":"BSD","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://web.archive.org/web/20080913083314/http://www.hellanzb.com/trac/","description":"Nzb downloader and post processor","long_description":"hellanzb is an easy to use app designed to retrieve nzb files and fully process them. The goal being to make getting files from Usenet as hands-free as possible. Once fully installed, all that's required is moving an nzb file to the queue directory. The rest: downloading, par-checking, un-raring, etc. is done automatically by hellanzb.","active":true,"categories":["python","news"],"maintainers":[],"variants":["no_ssl"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["python27"]},{"type":"run","ports":["unrar","flac","shorten","py27-openssl","py27-twisted","par2"]}],"depends_on":[]},{"name":"leafnode","portdir":"news/leafnode","version":"1.12.0","license":"GPL-2","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://leafnode.sourceforge.net/","description":"Leafnode is a store & forward NNTP proxy","long_description":"Leafnode is a software package that implements a store & forward NNTP proxy (client and server) that supportis TCP connections across IPv4 and IPv6. It can be used to give a regular newsreader off-line functionality, merge news articles from several upstream newsservers for newsreaders that only support one server well and avoid duplicate news download for a small LAN with multiple users reading news.","active":true,"categories":["news"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"extract","ports":["xz"]},{"type":"lib","ports":["pcre2"]}],"depends_on":[]},{"name":"nget","portdir":"news/nget","version":"0.27.1","license":"GPL-2+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://nget.sourceforge.net/","description":"nget is a command line nntp file grabber","long_description":"nget is a command line nntp file grabber. It automatically pieces together multipart postings for easy retrieval, even substituting parts from multiple servers and newsgroups. Handles disconnects gracefully, resuming after the last part succesfully downloaded.","active":true,"categories":["news"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["popt","uudeview"]}],"depends_on":[]},{"name":"nnap","portdir":"news/nnap","version":"1.1","license":"unknown","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://www.freebsdcluster.org/~lasse/","description":"Nnap is a lightweight NNTP authentication proxy","long_description":"A small program that implements just enough of the NNTP protocol to authenticate client requests. After authentication client requests. After authentication nnap bounces the client TCP connection to an open NNTP server.","active":true,"categories":["news"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]}],"depends_on":[]},{"name":"pan2","portdir":"news/pan2","version":"0.161","license":"GPL-2","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://gitlab.gnome.org/GNOME/pan","description":"News reader for GTK+ version 3.","long_description":"Pan2 is a newsreader for GTK+ that is based on the Agent newsreader for Windows OSes.","active":true,"categories":["news"],"maintainers":[],"variants":["debug","x11","quartz","universal"],"dependencies":[{"type":"build","ports":["cmake","gettext","pkgconfig","makeicns","clang-18"]},{"type":"lib","ports":["gtk3","libsecret","gmime3","libiconv","zlib","gnutls","desktop-file-utils","gcr","gspell"]},{"type":"run","ports":["adwaita-icon-theme"]}],"depends_on":[]},{"name":"slrn","portdir":"news/slrn","version":"1.0.3","license":"GPL-2","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"http://slrn.sourceforge.net/","description":"A powerful console-based newsreader","long_description":"slrn is an easy to use but powerful NNTP/spool based newsreader. It is highly customizable, supports scoring, free key bindings, and can be extended using the SLang macro language.","active":true,"categories":["net","news"],"maintainers":[],"variants":["pull","ssl","uudeview","universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["gettext","slang2","libiconv"]}],"depends_on":[]},{"name":"xpn","portdir":"news/xpn","version":"1.2.6","license":"GPL-2","platforms":"any","epoch":0,"replaced_by":null,"homepage":"http://xpn.altervista.org/","description":"Graphical newsreader written in PyGtk.","long_description":"XPN (X Python Newsreader) is a news client written in Python and based on the GTK+ library. It offers a good MIME support, scoring system, filtered views, random tag-lines, external editor support, one-key navigation, ROT13, Face and X-Face headers decoding, spoiler char and many more.","active":true,"categories":["news"],"maintainers":[],"variants":[],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["py27-pygtk"]}],"depends_on":[]},{"name":"yencode","portdir":"news/yencode","version":"0.46","license":"GPL-2+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://web.archive.org/web/20051221043535/http://www.yencode.org/","description":"yENC encoder/decoder","long_description":"This is yencode, an encoder/decoder package for the Usenet \"yENC\" format.","active":true,"categories":["sysutils","news"],"maintainers":[],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-18"]},{"type":"lib","ports":["libiconv"]}],"depends_on":[]},{"name":"octave-bim","portdir":"octave/octave-bim","version":"1.1.8","license":"GPL-2+","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://github.com/carlodefalco/bim","description":"Package for solving Diffusion Advection Reaction (DAR) Partial Differential Equaltions based on the Finite Volume Scharfetter-Gummel (FVSG) method a.k.a Box Integration Method (BIM).","long_description":"Package for solving Diffusion Advection Reaction (DAR) Partial Differential Equaltions based on the Finite Volume Scharfetter-Gummel (FVSG) method a.k.a Box Integration Method (BIM).","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":[],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave","octave-fpl","octave-msh"]}],"depends_on":[{"type":"lib","ports":["octave-secs1d","octave-sole"]}]},{"name":"octave-bioinfo","portdir":"octave/octave-bioinfo","version":"0.2.2","license":"GPL-3+","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://github.com/schloegl/octmat-bioinfo","description":"Bioinformatics manipulation.","long_description":"Bioinformatics manipulation.","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":[],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave"]}],"depends_on":[]},{"name":"octave-bsltl","portdir":"octave/octave-bsltl","version":"1.3.1","license":"GPL-2+","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://gnu-octave.github.io/packages/bsltl/","description":"The BSLTL package is a free collection of OCTAVE/MATLAB routines for working with the biospeckle laser technique.","long_description":"The BSLTL package is a free collection of OCTAVE/MATLAB routines for working with the biospeckle laser technique.","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":[],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave"]}],"depends_on":[]},{"name":"octave-cgi","portdir":"octave/octave-cgi","version":"0.1.2","license":"GPL-2+","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://gnu-octave.github.io/packages/cgi/","description":"Common Gateway Interface for Octave","long_description":"Common Gateway Interface for Octave","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":[],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave"]}],"depends_on":[]},{"name":"octave-coder","portdir":"octave/octave-coder","version":"1.11.1","license":"AGPL-3+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://github.com/shsajjadi/OctaveCoder","description":"Octave Coder is a code generator and build system that, given a function name translates the function and all of its dependencies to C++ and builds a .oct shared module.","long_description":"Octave Coder is a code generator and build system that, given a function name translates the function and all of its dependencies to C++ and builds a .oct shared module.","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave"]}],"depends_on":[]},{"name":"octave-data-smoothing","portdir":"octave/octave-data-smoothing","version":"1.3.0","license":"GPL-3+","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://gnu-octave.github.io/packages/data-smoothing/","description":"Algorithms for smoothing noisy data.","long_description":"Algorithms for smoothing noisy data.","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":[],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave","octave-optim"]}],"depends_on":[]},{"name":"octave-database","portdir":"octave/octave-database","version":"2.4.4","license":"GPL-3+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://gnu-octave.github.io/packages/database/","description":"Interface to SQL databases, currently only postgresql using libpq.","long_description":"Interface to SQL databases, currently only postgresql using libpq.","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":["postgresql83","postgresql84","postgresql90","postgresql91","postgresql92","postgresql93","postgresql94","postgresql95","postgresql96","postgresql10","postgresql11","postgresql12","postgresql13","postgresql14","postgresql15","postgresql16","postgresql17","postgresql18","universal"],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["swig-octave","octave","octave-struct","postgresql18"]}],"depends_on":[]},{"name":"octave-dataframe","portdir":"octave/octave-dataframe","version":"1.2.0","license":"GPL-3+","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://gnu-octave.github.io/packages/dataframe/","description":"Data manipulation toolbox similar to R data.frame.","long_description":"Data manipulation toolbox similar to R data.frame.","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":[],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave"]}],"depends_on":[]},{"name":"octave-divand","portdir":"octave/octave-divand","version":"1.1.2","license":"GPL-2+","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://gnu-octave.github.io/packages/divand/","description":"divand performs an n-dimensional variational analysis (interpolation) of arbitrarily located observations.","long_description":"divand performs an n-dimensional variational analysis (interpolation) of arbitrarily located observations.","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":[],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave"]}],"depends_on":[]},{"name":"octave-econometrics","portdir":"octave/octave-econometrics","version":"1.1.2","license":"GPL-3+","platforms":"darwin","epoch":0,"replaced_by":null,"homepage":"https://gnu-octave.github.io/packages/econometrics/","description":"Econometrics functions including MLE and GMM based techniques.","long_description":"Econometrics functions including MLE and GMM based techniques.","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":["universal"],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave","octave-optim"]}],"depends_on":[]},{"name":"octave-financial","portdir":"octave/octave-financial","version":"0.5.4","license":"GPL-3+","platforms":"{darwin any}","epoch":0,"replaced_by":null,"homepage":"https://gnu-octave.github.io/packages/financial/","description":"Financial manipulation, plotting functions and additional date manipulation tools.","long_description":"Financial manipulation, plotting functions and additional date manipulation tools.","active":true,"categories":["science","math","octave"],"maintainers":[{"name":"mps","github":"Schamschula","ports_count":1677}],"variants":[],"dependencies":[{"type":"build","ports":["clang-20"]},{"type":"lib","ports":["octave","octave-io","octave-statistics"]}],"depends_on":[]}]}