HTTP 200 OK
Allow: GET, HEAD, OPTIONS
Content-Type: application/json
Vary: Accept
{
"count": 49661,
"next": "https://ports.macports.org/api/v1/ports/?format=api&ordering=-created_at&page=58",
"previous": "https://ports.macports.org/api/v1/ports/?format=api&ordering=-created_at&page=56",
"results": [
{
"name": "py313-pyqt5",
"portdir": "python/py-pyqt5",
"version": "5.15.11",
"license": "(GPL-3 or OpenSSLException)",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://www.riverbankcomputing.com/software/pyqt/intro",
"description": "PyQt5 is a set of Python bindings for the Qt5 toolkit",
"long_description": "PyQt5 is a set of Python bindings for the Qt5 toolkit. The bindings are implemented as a set of Python modules and contain over 620 classes.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [
"webkit",
"debug"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-sip",
"pkgconfig",
"clang-18",
"py313-pyqt-builder"
]
},
{
"type": "lib",
"ports": [
"python313",
"qt5",
"dbus-python313",
"qt5-qtbase",
"qt5-qtscript",
"qt5-qt3d"
]
},
{
"type": "run",
"ports": [
"py313-pyqt5-sip"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-pyqtgraph",
"qgis3-ltr",
"py313-vispy",
"py313-superqt",
"py313-pymca",
"tortoisehg",
"py313-magicgui",
"py-pyqt5",
"py313-pyqt5-chart",
"py313-pyqt5-scintilla",
"py313-pyqt5-webengine",
"qgis3"
]
},
{
"type": "run",
"ports": [
"pymol",
"pymol-devel",
"py313-qimage2ndarray",
"py313-spyder"
]
}
]
},
{
"name": "py313-pkgconfig",
"portdir": "python/py-pkgconfig",
"version": "1.5.5",
"license": "MIT",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/matze/pkgconfig",
"description": "Python module to interface with pkg-config.",
"long_description": "Python module to interface with pkg-config. It can be used to check if a package exists, check if a package meets certain version requirements, query CFLAGS and LDFLAGS, and parse the output to build extensions with setup.py.",
"active": true,
"categories": [
"python"
],
"maintainers": [],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py313-build",
"py313-installer",
"py313-poetry-core"
]
},
{
"type": "lib",
"ports": [
"python313"
]
},
{
"type": "run",
"ports": [
"pkgconfig"
]
}
],
"depends_on": [
{
"type": "build",
"ports": [
"py313-xmlsec",
"py313-aiohttp",
"py313-lz4",
"py313-h5py",
"borgbackup"
]
},
{
"type": "lib",
"ports": [
"py-pkgconfig",
"py313-virtualfish"
]
}
]
},
{
"name": "py313-parsing",
"portdir": "python/py-parsing",
"version": "3.2.5",
"license": "MIT",
"platforms": "{darwin any}",
"epoch": 2,
"replaced_by": null,
"homepage": "https://github.com/pyparsing/pyparsing/",
"description": "alternative approach to creating parsers in python",
"long_description": "The parsing module is an alternative approach to creating and executing simple grammars, vs. the traditional lex/yacc approach, or the use of regular expressions. The parsing module provides a library of classes that client code uses to construct the grammar directly in Python code.",
"active": true,
"categories": [
"lang",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py313-build",
"py313-flit_core",
"py313-installer"
]
},
{
"type": "lib",
"ports": [
"python313"
]
}
],
"depends_on": [
{
"type": "build",
"ports": [
"cabal"
]
},
{
"type": "lib",
"ports": [
"py313-rdflib",
"py313-mdtraj",
"py-parsing",
"certbot-nginx",
"py313-matplotlib",
"py313-httplib2",
"py313-snuggs",
"py313-mitmproxy"
]
},
{
"type": "run",
"ports": [
"py313-rasterio",
"py313-oslo-utils",
"cmake-language-server",
"py313-cloudscraper",
"py313-pydot"
]
}
]
},
{
"name": "py313-lz4",
"portdir": "python/py-lz4",
"version": "4.4.4",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/python-lz4/python-lz4",
"description": "LZ4 bindings for Python",
"long_description": "LZ4 bindings for Python",
"active": true,
"categories": [
"python"
],
"maintainers": [],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-setuptools_scm",
"py313-pkgconfig",
"clang-18",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel"
]
},
{
"type": "lib",
"ports": [
"lz4",
"python313"
]
},
{
"type": "test",
"ports": [
"py313-pytest",
"py313-psutil"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-lz4"
]
}
]
},
{
"name": "py313-kiwisolver",
"portdir": "python/py-kiwisolver",
"version": "1.4.9",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/nucleic/kiwi",
"description": "Kiwi is an efficient C++ implementation of the Cassowary constraint solving algorithm.",
"long_description": "Kiwi is an implementation of the algorithm based on the seminal Cassowary paper. It is not a refactoring of the original C++ solver. Kiwi has been designed from the ground up to be lightweight and fast. Kiwi ranges from 10x to 500x faster than the original Cassowary solver with typical use cases gaining a 40x improvement. Memory savings are consistently > 5x.",
"active": true,
"categories": [
"math",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-cppy",
"clang-18",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel",
"py313-setuptools_scm"
]
},
{
"type": "lib",
"ports": [
"python313"
]
},
{
"type": "test",
"ports": [
"py313-pytest"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-kiwisolver",
"py313-matplotlib",
"py313-vispy"
]
}
]
},
{
"name": "py312-fontaine",
"portdir": "python/py-fontaine",
"version": "1.4.0",
"license": "GPL-3",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/googlefonts/pyfontaine",
"description": "a font analyzing tool",
"long_description": "pyfontaine analyses fonts for their language and character/glyph-set support.",
"active": true,
"categories": [
"devel",
"python",
"print"
],
"maintainers": [],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"clang-17",
"py312-build",
"py312-installer"
]
},
{
"type": "lib",
"ports": [
"py312-lxml",
"python312",
"py312-tabulate",
"py312-fonttools",
"py312-requests",
"py312-pyicu"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-fontaine"
]
}
]
},
{
"name": "py313-cycler",
"portdir": "python/py-cycler",
"version": "0.12.1",
"license": "(PSF or BSD)",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/matplotlib/cycler",
"description": "cycler: composable cycles",
"long_description": "cycler: composable cycles",
"active": true,
"categories": [
"math",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py313-installer",
"clang-18",
"py313-build",
"py313-setuptools",
"py313-wheel"
]
},
{
"type": "lib",
"ports": [
"python313"
]
},
{
"type": "test",
"ports": [
"py313-pytest"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-matplotlib",
"py-cycler"
]
},
{
"type": "run",
"ports": [
"qgis3",
"qgis3-ltr"
]
}
]
},
{
"name": "py313-cppy",
"portdir": "python/py-cppy",
"version": "1.3.1",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/nucleic/cppy",
"description": "C++ headers for C extension development",
"long_description": "C++ headers for C extension development",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py313-setuptools_scm",
"clang-18",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel"
]
},
{
"type": "lib",
"ports": [
"python313"
]
},
{
"type": "test",
"ports": [
"py313-pytest"
]
}
],
"depends_on": [
{
"type": "build",
"ports": [
"py313-kiwisolver"
]
},
{
"type": "lib",
"ports": [
"py-cppy"
]
}
]
},
{
"name": "py313-contourpy",
"portdir": "python/py-contourpy",
"version": "1.3.3",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/contourpy/contourpy",
"description": "Python library for calculating contours of 2D quadrilateral grids",
"long_description": "Python library for calculating contours of 2D quadrilateral grids",
"active": true,
"categories": [
"math",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-pybind11",
"clang-20",
"py313-build",
"py313-installer",
"py313-meson-python"
]
},
{
"type": "lib",
"ports": [
"python313",
"py313-numpy"
]
},
{
"type": "test",
"ports": [
"py313-pytest",
"py313-wurlitzer"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-contourpy",
"py313-matplotlib",
"py313-sunpy",
"py313-bokeh"
]
}
]
},
{
"name": "py313-cairo",
"portdir": "python/py-cairo",
"version": "1.28.0",
"license": "(LGPL-2.1 or MPL-1.1)",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/pygobject/pycairo",
"description": "Pycairo is set of Python bindings for the cairo graphics library",
"long_description": "Pycairo is set of Python bindings for the cairo graphics library",
"active": true,
"categories": [
"graphics",
"python"
],
"maintainers": [],
"variants": [
"quartz",
"x11",
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-setuptools",
"py313-cython",
"py313-meson-python",
"pkgconfig",
"clang-18",
"py313-build",
"py313-installer"
]
},
{
"type": "lib",
"ports": [
"glib2",
"cairo",
"python313"
]
},
{
"type": "test",
"ports": [
"py313-hypothesis",
"py313-pytest"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-gobject3",
"quodlibet",
"mat2",
"py313-matplotlib",
"py-cairo"
]
}
]
},
{
"name": "dbus-python313",
"portdir": "devel/dbus-python",
"version": "1.3.2",
"license": "MIT",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://www.freedesktop.org/wiki/Software/dbus/",
"description": "Python bindings for the dbus message bus system.",
"long_description": "Python bindings for the dbus message bus system.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "mcalhoun",
"github": "MarcusCalhoun-Lopez",
"ports_count": 1502
}
],
"variants": [
"doc",
"examples",
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"pkgconfig",
"clang-18"
]
},
{
"type": "lib",
"ports": [
"gettext",
"glib2",
"dbus",
"python313",
"libiconv",
"dbus-glib"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"gedit-plugins",
"quodlibet",
"py313-pyqt5",
"py313-pyqt6",
"beets",
"beets-devel",
"avahi"
]
}
]
},
{
"name": "py313-websockets",
"portdir": "python/py-websockets",
"version": "14.2",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/aaugustin/websockets",
"description": "WebSocket implementation in Python 3",
"long_description": "websockets is a library for building WebSocket servers and clients in Python with a focus on correctness and simplicity. Built on top of asyncio, Python's standard asynchronous I/O framework, it provides an elegant coroutine-based API.",
"active": true,
"categories": [
"python"
],
"maintainers": [],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-17",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel"
]
},
{
"type": "lib",
"ports": [
"python313"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-undetected-chromedriver",
"py-websockets"
]
},
{
"type": "run",
"ports": [
"py313-socketio"
]
}
]
},
{
"name": "py313-uncertainties",
"portdir": "python/py-uncertainties",
"version": "3.2.3",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/lmfit/uncertainties",
"description": "The Python uncertainties package",
"long_description": "The uncertainties package transparently handles calculations for numbers with uncertainties.",
"active": true,
"categories": [
"math",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py313-setuptools_scm",
"clang-18",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel"
]
},
{
"type": "lib",
"ports": [
"python313"
]
},
{
"type": "test",
"ports": [
"py313-pytest",
"py313-numpy"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-lmfit",
"py-uncertainties"
]
},
{
"type": "run",
"ports": [
"py313-xraylarch",
"py313-pymatgen"
]
}
]
},
{
"name": "py313-lmfit",
"portdir": "python/py-lmfit",
"version": "1.3.4",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://lmfit.github.io/lmfit-py/",
"description": "Least-Squares Minimization with Bounds and Constraints",
"long_description": "Built on top of scipy.optimize, lmfit provides a Parameter object which can be set as fixed or free, can have upper and/or lower bounds, or can be written in terms of algebraic constraints of other Parameters.",
"active": true,
"categories": [
"math",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
},
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel",
"py313-setuptools_scm"
]
},
{
"type": "lib",
"ports": [
"python313",
"py313-asteval",
"py313-numpy",
"py313-scipy",
"py313-uncertainties",
"py313-dill"
]
},
{
"type": "test",
"ports": [
"py313-pytest"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"chemex",
"py-lmfit",
"peakipy"
]
},
{
"type": "run",
"ports": [
"py313-xraylarch"
]
}
]
},
{
"name": "py313-tomli-w",
"portdir": "python/py-tomli-w",
"version": "1.2.0",
"license": "MIT",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/hukkin/tomli-w",
"description": "A lil' TOML parser",
"long_description": "Tomli-W is a Python library for writing TOML. It is a write-only counterpart to Tomli, which is a read-only TOML parser. Tomli-W is fully compatible with TOML v1.0.0.",
"active": true,
"categories": [
"python"
],
"maintainers": [
{
"name": "toby",
"github": "tobypeterson",
"ports_count": 240
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py313-build",
"py313-flit_core",
"py313-installer"
]
},
{
"type": "lib",
"ports": [
"python313"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"hatch",
"py-tomli-w"
]
},
{
"type": "run",
"ports": [
"py313-flit"
]
}
]
},
{
"name": "py313-pypdf",
"portdir": "python/py-pypdf",
"version": "6.2.0",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/py-pdf/pypdf",
"description": "A utility to read and write pdfs with Python",
"long_description": "A Pure-Python PDF toolkit. It is capable of extracting document information, splitting documents page by page, merging documents page by page, cropping pages, merging multiple pages into a single page, and encrypting and decrypting PDF files.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py313-installer",
"clang-18",
"py313-build",
"py313-flit_core"
]
},
{
"type": "lib",
"ports": [
"python313"
]
},
{
"type": "test",
"ports": [
"py313-pytest",
"py313-pytest-timeout",
"py313-yaml"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-pypdf"
]
}
]
},
{
"name": "py312-pacal",
"portdir": "python/py-pacal",
"version": "1.6.1",
"license": "GPL-3+",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "http://pacal.sourceforge.net/index.html",
"description": "PaCAL - ProbAbilistic CALculator",
"long_description": "What is PaCAL? PaCAL is a Python package which allows you to perform arithmetic on random variables just like you do with ordinary program variables. The variables can follow practically any distribution.",
"active": true,
"categories": [
"python"
],
"maintainers": [
{
"name": "adfernandes",
"github": "adfernandes",
"ports_count": 41
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py312-build",
"py312-installer",
"py312-setuptools",
"py312-wheel",
"py312-cython"
]
},
{
"type": "lib",
"ports": [
"py312-numpy",
"py312-sympy",
"py312-matplotlib",
"py312-scipy",
"python312"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-pacal"
]
}
]
},
{
"name": "py311-pacal",
"portdir": "python/py-pacal",
"version": "1.6.1",
"license": "GPL-3+",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "http://pacal.sourceforge.net/index.html",
"description": "PaCAL - ProbAbilistic CALculator",
"long_description": "What is PaCAL? PaCAL is a Python package which allows you to perform arithmetic on random variables just like you do with ordinary program variables. The variables can follow practically any distribution.",
"active": true,
"categories": [
"python"
],
"maintainers": [
{
"name": "adfernandes",
"github": "adfernandes",
"ports_count": 41
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py311-build",
"py311-installer",
"py311-setuptools",
"py311-wheel",
"py311-cython"
]
},
{
"type": "lib",
"ports": [
"py311-sympy",
"py311-numpy",
"py311-matplotlib",
"py311-scipy",
"python311"
]
}
],
"depends_on": []
},
{
"name": "py310-pacal",
"portdir": "python/py-pacal",
"version": "1.6.1",
"license": "GPL-3+",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "http://pacal.sourceforge.net/index.html",
"description": "PaCAL - ProbAbilistic CALculator",
"long_description": "What is PaCAL? PaCAL is a Python package which allows you to perform arithmetic on random variables just like you do with ordinary program variables. The variables can follow practically any distribution.",
"active": true,
"categories": [
"python"
],
"maintainers": [
{
"name": "adfernandes",
"github": "adfernandes",
"ports_count": 41
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py310-setuptools",
"py310-cython",
"py310-wheel",
"py310-build",
"py310-installer"
]
},
{
"type": "lib",
"ports": [
"py310-numpy",
"py310-sympy",
"py310-scipy",
"py310-matplotlib",
"python310"
]
}
],
"depends_on": []
},
{
"name": "py39-pacal",
"portdir": "python/py-pacal",
"version": "1.6.1",
"license": "GPL-3+",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "http://pacal.sourceforge.net/index.html",
"description": "PaCAL - ProbAbilistic CALculator",
"long_description": "What is PaCAL? PaCAL is a Python package which allows you to perform arithmetic on random variables just like you do with ordinary program variables. The variables can follow practically any distribution.",
"active": false,
"categories": [
"python"
],
"maintainers": [
{
"name": "adfernandes",
"github": "adfernandes",
"ports_count": 41
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-17",
"py39-cython",
"py39-setuptools",
"py39-wheel",
"py39-build",
"py39-installer"
]
},
{
"type": "lib",
"ports": [
"py39-matplotlib",
"py39-numpy",
"py39-scipy",
"py39-sympy",
"python39"
]
}
],
"depends_on": []
},
{
"name": "py313-shapely",
"portdir": "python/py-shapely",
"version": "2.1.2",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://shapely.readthedocs.io/en/stable/",
"description": "Shapely is a Python package for manipulation and analysis of 2D geospatial geometries",
"long_description": "Shapely is a Python package for manipulation and analysis of 2D geospatial geometries. It is based on GEOS (http://geos.refractions.net) Shapely 1.0 is not concerned with data formats or coordinate reference systems.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "snc",
"github": "nerdling",
"ports_count": 156
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-cython",
"py313-installer",
"py313-setuptools",
"py313-wheel",
"clang-18",
"py313-build"
]
},
{
"type": "lib",
"ports": [
"python313",
"py313-numpy",
"geos"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-regions",
"py-shapely",
"py313-cartopy",
"py313-geopandas"
]
},
{
"type": "run",
"ports": [
"qgis3",
"qgis3-ltr",
"py313-esda",
"py313-momepy",
"py313-spopt",
"py313-libpysal",
"py313-rasterstats",
"py313-pointpats",
"py313-spaghetti"
]
}
]
},
{
"name": "py313-igraph",
"portdir": "python/py-igraph",
"version": "1.0.0",
"license": "GPL-2+",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://igraph.org/python/",
"description": "Python interface to the igraph library.",
"long_description": "Python interface to the igraph library for network analysis and graph theory.",
"active": true,
"categories": [
"science",
"math",
"python"
],
"maintainers": [
{
"name": "snc",
"github": "nerdling",
"ports_count": 156
},
{
"name": "szhorvat",
"github": "szhorvat",
"ports_count": 18
}
],
"variants": [
"external_igraph",
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-setuptools",
"py313-wheel",
"clang-20",
"pkgconfig",
"py313-build",
"py313-installer"
]
},
{
"type": "lib",
"ports": [
"igraph",
"python313",
"py313-texttable"
]
},
{
"type": "test",
"ports": [
"py313-pytest",
"py313-numpy",
"py313-scipy",
"py313-matplotlib",
"py313-networkx",
"py313-pandas"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-igraph"
]
}
]
},
{
"name": "py313-pyerfa",
"portdir": "python/py-pyerfa",
"version": "2.0.1.5",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/liberfa/pyerfa",
"description": "PyERFA is the Python wrapper for the ERFA library",
"long_description": "PyERFA is the Python wrapper for the ERFA library (Essential Routines for Fundamental Astronomy), a C library containing key algorithms for astronomy, which is based on the SOFA library published by the International Astronomical Union (IAU).",
"active": true,
"categories": [
"science",
"python"
],
"maintainers": [
{
"name": "mps",
"github": "Schamschula",
"ports_count": 1098
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-setuptools_scm",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel",
"clang-18"
]
},
{
"type": "lib",
"ports": [
"python313",
"py313-numpy",
"py313-jinja2",
"erfa"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-astropy",
"py-pyerfa"
]
}
]
},
{
"name": "hledger-iadd",
"portdir": "finance/hledger-iadd",
"version": "1.3.21",
"license": "BSD-3-Clause",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/hpdeifel/hledger-iadd",
"description": "A terminal UI as drop-in replacement for hledger add",
"long_description": "hledger-iadd improves in the following ways on hledger's add command: \n \n* Interactive as-you-type completion for account names and descriptions with optional fuzzy matching. \n* Integrated calculator. Amounts can be written as simple sums with real-time feedback on the result. \n* All actions while entering a transaction can be undone. \n* Configurable format for date input. Instead of y/m/d it is also possible to use other formats like the german d.m.y.",
"active": true,
"categories": [
"haskell",
"finance"
],
"maintainers": [
{
"name": "ivofrolov",
"github": "ivofrolov",
"ports_count": 2
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"clang-17",
"cctools",
"openssl",
"stack",
"file",
"grep",
"gsed"
]
},
{
"type": "run",
"ports": [
"hledger"
]
}
],
"depends_on": []
},
{
"name": "py313-threadpoolctl",
"portdir": "python/py-threadpoolctl",
"version": "3.6.0",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/joblib/threadpoolctl",
"description": "Helpers to limit the number of threads used in the common native libraries.",
"long_description": "Helpers to limit the number of threads used in the common native libraries.",
"active": true,
"categories": [
"science",
"python"
],
"maintainers": [
{
"name": "stromnov",
"github": "stromnov",
"ports_count": 2758
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py313-build",
"py313-flit_core",
"py313-installer"
]
},
{
"type": "lib",
"ports": [
"python313"
]
},
{
"type": "test",
"ports": [
"py313-pytest"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-threadpoolctl",
"py313-pymc",
"py313-MDAnalysis",
"py313-scikit-learn"
]
},
{
"type": "test",
"ports": [
"py313-scipy"
]
}
]
},
{
"name": "py313-scipy",
"portdir": "python/py-scipy",
"version": "1.16.3",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://www.scipy.org/",
"description": "An opensource library of scientific tools for Python",
"long_description": "An opensource library of scientific tools for Python",
"active": true,
"categories": [
"python"
],
"maintainers": [
{
"name": "michaelld",
"github": "michaelld",
"ports_count": 461
},
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [
"gcc10",
"gcc11",
"gcc12",
"gcc13",
"gcc14",
"gcc15",
"gccdevel",
"gfortran",
"accelerate",
"openblas",
"flexiblas",
"blis"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-installer",
"py313-cython",
"py313-meson-python",
"py313-pythran",
"clang-20",
"gcc15",
"pkgconfig",
"py313-build"
]
},
{
"type": "lib",
"ports": [
"libgcc",
"boost181",
"python313",
"py313-mypy",
"py313-numpy",
"py313-pybind11"
]
},
{
"type": "test",
"ports": [
"py313-hypothesis",
"py313-pytest",
"py313-mpmath",
"py313-gmpy2",
"py313-pooch",
"py313-scikit-umfpack",
"py313-threadpoolctl"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-peakutils",
"py313-usadel1",
"napari",
"py-scipy",
"py313-pymc",
"py313-pytensor",
"peakipy",
"py313-networkit",
"py313-astropy",
"py313-mapclassify",
"py313-nmrglue",
"py313-nmrglue-devel",
"py313-scikit-image",
"py313-statsmodels",
"py313-arviz",
"py313-xarray-einstats",
"py313-metpy",
"py313-pyqtgraph",
"py313-libsvm",
"py313-GridDataFormats",
"py313-MDAnalysis",
"py313-mdtraj",
"py313-scikit-learn",
"py313-pyFAI",
"py313-cartopy",
"py313-tropycal",
"py313-obspy",
"py313-quantecon",
"verde",
"chemex",
"py313-scikit-umfpack",
"py313-astlib",
"py313-beancount-import",
"py313-algopy",
"py313-lmfit",
"py313-numdifftools",
"py313-plotpy"
]
},
{
"type": "run",
"ports": [
"py313-giddy",
"qgis3",
"qgis3-ltr",
"py313-reproject",
"py313-tobler",
"py313-librosa",
"py313-spyder",
"py313-resampy",
"py313-spglm",
"py313-spreg",
"py313-spvcm",
"py313-inequality",
"py313-xraylarch",
"py313-spint",
"py313-xraydb",
"py313-pymatgen",
"py313-esda",
"py313-spaghetti",
"py313-spopt",
"py313-libpysal",
"py313-mgwr",
"py313-pointpats"
]
},
{
"type": "test",
"ports": [
"py313-emcee3",
"py313-igraph",
"py313-svgelements",
"py313-patsy"
]
}
]
},
{
"name": "py313-scikit-umfpack",
"portdir": "python/py-scikit-umfpack",
"version": "0.4.2",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://pypi.org/project/scikit-umfpack/",
"description": "scikit-umfpack provides wrapper of UMFPACK sparse direct solver to SciPy.",
"long_description": "scikit-umfpack provides wrapper of UMFPACK sparse direct solver to SciPy.",
"active": true,
"categories": [
"math",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py313-meson-python",
"swig-python",
"clang-18",
"py313-build",
"py313-installer"
]
},
{
"type": "lib",
"ports": [
"python313",
"py313-numpy",
"py313-scipy",
"SuiteSparse_UMFPACK"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-scikit-umfpack"
]
},
{
"type": "test",
"ports": [
"py313-scipy"
]
}
]
},
{
"name": "py312-scikit-umfpack",
"portdir": "python/py-scikit-umfpack",
"version": "0.4.2",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://pypi.org/project/scikit-umfpack/",
"description": "scikit-umfpack provides wrapper of UMFPACK sparse direct solver to SciPy.",
"long_description": "scikit-umfpack provides wrapper of UMFPACK sparse direct solver to SciPy.",
"active": true,
"categories": [
"math",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"swig-python",
"py312-build",
"py312-installer",
"py312-meson-python"
]
},
{
"type": "lib",
"ports": [
"python312",
"py312-numpy",
"py312-scipy",
"SuiteSparse_UMFPACK"
]
}
],
"depends_on": [
{
"type": "test",
"ports": [
"py312-scipy"
]
}
]
},
{
"name": "py313-pythran",
"portdir": "python/py-pythran",
"version": "0.18.0",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/serge-sans-paille/pythran",
"description": "Ahead of Time compiler for numeric kernels",
"long_description": "Ahead of Time compiler for numeric kernels",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py313-wheel",
"clang-18",
"py313-build",
"py313-installer",
"py313-setuptools"
]
},
{
"type": "lib",
"ports": [
"python313",
"py313-numpy",
"py313-beniget",
"py313-gast",
"py313-ply"
]
}
],
"depends_on": [
{
"type": "build",
"ports": [
"py313-scipy",
"py313-scikit-image",
"py313-vispy",
"py313-silx"
]
},
{
"type": "lib",
"ports": [
"py-pythran",
"py313-astropy"
]
}
]
},
{
"name": "py313-pybind11",
"portdir": "python/py-pybind11",
"version": "3.0.1",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/pybind/pybind11",
"description": "Seamless operability between C++11 and Python.",
"long_description": "pybind11 is a lightweight header-only library that exposes C++ types in Python and vice versa, mainly to create Python bindings of existing C++ code.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "stromnov",
"github": "stromnov",
"ports_count": 2758
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py313-scikit-build-core",
"ninja",
"clang-18",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel"
]
},
{
"type": "lib",
"ports": [
"python313"
]
}
],
"depends_on": [
{
"type": "build",
"ports": [
"py313-matplotlib",
"py313-contourpy",
"py313-fasttext",
"py313-pdal",
"py313-pdal-plugins"
]
},
{
"type": "lib",
"ports": [
"py313-pytorch",
"ocrmypdf",
"py313-pytomlpp",
"py313-scipy",
"py313-pikepdf",
"pcraster",
"py-pybind11"
]
}
]
},
{
"name": "py313-pooch",
"portdir": "python/py-pooch",
"version": "1.8.2",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/fatiando/pooch",
"description": "Pooch manages your Python library's sample data files it automatically downloads and stores them in a local directory with support for versioning and corruption checks.",
"long_description": "Pooch manages your Python library's sample data files it automatically downloads and stores them in a local directory with support for versioning and corruption checks.",
"active": true,
"categories": [
"python"
],
"maintainers": [
{
"name": "mps",
"github": "Schamschula",
"ports_count": 1098
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py313-setuptools_scm",
"clang-18",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel"
]
},
{
"type": "lib",
"ports": [
"py313-packaging",
"py313-requests",
"py313-appdirs",
"py313-tqdm",
"python313"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"verde",
"py-pooch",
"py313-metpy"
]
},
{
"type": "run",
"ports": [
"py313-librosa"
]
},
{
"type": "test",
"ports": [
"py313-scipy"
]
}
]
},
{
"name": "py313-ply",
"portdir": "python/py-ply",
"version": "3.11",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://www.dabeaz.com/ply/",
"description": "lex and yacc implementation for Python",
"long_description": "lex and yacc implementation for Python",
"active": true,
"categories": [
"devel",
"lang",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py313-build",
"py313-installer",
"py313-setuptools",
"py313-wheel"
]
},
{
"type": "lib",
"ports": [
"python313"
]
}
],
"depends_on": [
{
"type": "build",
"ports": [
"qt6-qtwebengine",
"qt6-qtwebengine-docs",
"qt69-qtwebengine",
"qt69-qtwebengine-docs",
"qt68-qtwebengine",
"qt68-qtwebengine-docs"
]
},
{
"type": "lib",
"ports": [
"py313-jsonpath-rw",
"py313-sip",
"py313-smi",
"py313-sip-devel",
"py313-pycifrw",
"py-ply",
"py313-pythran",
"py313-beancount"
]
}
]
},
{
"name": "py313-gast",
"portdir": "python/py-gast",
"version": "0.6.0",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/serge-sans-paille/gast",
"description": "Python AST that abstracts the underlying Python version",
"long_description": "A generic AST to represent Python2 and Python3’s Abstract Syntax Tree(AST). GAST provides a compatibility layer between the AST of various Python versions, as produced by ast.parse from the standard ast module.",
"active": true,
"categories": [
"python"
],
"maintainers": [
{
"name": "emcrisostomo",
"github": "emcrisostomo",
"ports_count": 161
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py313-installer",
"clang-18",
"py313-build",
"py313-setuptools",
"py313-wheel"
]
},
{
"type": "lib",
"ports": [
"python313"
]
},
{
"type": "test",
"ports": [
"py313-pytest"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-pythran",
"py313-beniget",
"py-gast"
]
}
]
},
{
"name": "py313-beniget",
"portdir": "python/py-beniget",
"version": "0.4.2.post1",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/serge-sans-paille/beniget/",
"description": "Extract semantic information about static Python code",
"long_description": "Extract semantic information about static Python code",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "reneeotten",
"github": "reneeotten",
"ports_count": 1931
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py313-setuptools",
"py313-wheel",
"clang-18",
"py313-build",
"py313-installer"
]
},
{
"type": "lib",
"ports": [
"python313",
"py313-gast"
]
},
{
"type": "test",
"ports": [
"py313-pytest"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py313-pythran",
"py-beniget"
]
}
]
},
{
"name": "py39-demjson",
"portdir": "python/py-demjson",
"version": "2.2.4",
"license": "LGPL-3+",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/dmeranda/demjson",
"description": "encoder, decoder, and lint/validator for JSON compliant with RFC 4627",
"long_description": "encoder, decoder, and lint/validator for JSON (JavaScript Object Notation) compliant with RFC 4627. This module provides classes and functions for encoding or decoding data represented in the language-neutral JSON format. This implementation tries to be as compliant to the JSON specification (RFC 4627) as possible, while still providing many optional extensions to allow less restrictive JavaScript syntax. It includes complete Unicode support, including UTF-32, BOM, and surrogate pair processing. It can also support JavaScript's NaN and Infinity numeric types as well as its 'undefined' type. It also includes a lint-like JSON syntax validator which tests JSON text for strict compliance to the standard.",
"active": true,
"categories": [
"python"
],
"maintainers": [],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py39-build",
"py39-setuptools",
"py39-wheel",
"py39-installer",
"clang-17"
]
},
{
"type": "lib",
"ports": [
"python39"
]
},
{
"type": "test",
"ports": [
"py39-pytest"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-demjson"
]
}
]
},
{
"name": "py313-pyglet",
"portdir": "python/py-pyglet",
"version": "2.1.6",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://pyglet.readthedocs.org/",
"description": "A cross-platform windowing and multimedia library for Python.",
"long_description": "A cross-platform windowing and multimedia library for Python.",
"active": true,
"categories": [
"devel",
"graphics",
"python"
],
"maintainers": [
{
"name": "stromnov",
"github": "stromnov",
"ports_count": 2758
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"clang-17",
"py313-build",
"py313-flit_core",
"py313-installer"
]
},
{
"type": "lib",
"ports": [
"python313"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-pyglet"
]
}
]
},
{
"name": "py311-traits",
"portdir": "python/py-traits",
"version": "6.4.3",
"license": "BSD and (PSF or ZPL)",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/traits",
"description": "The Enthought traits package",
"long_description": "A trait is a type definition that can be used for normal Python object attributes, giving the attributes some additional characteristics.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py311-build",
"py311-installer",
"py311-setuptools",
"py311-wheel",
"clang-17"
]
},
{
"type": "lib",
"ports": [
"python311"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py311-pyface"
]
}
]
},
{
"name": "py310-traits",
"portdir": "python/py-traits",
"version": "6.4.3",
"license": "BSD and (PSF or ZPL)",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/traits",
"description": "The Enthought traits package",
"long_description": "A trait is a type definition that can be used for normal Python object attributes, giving the attributes some additional characteristics.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"py310-setuptools",
"py310-wheel",
"py310-build",
"py310-installer",
"clang-17"
]
},
{
"type": "lib",
"ports": [
"python310"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py310-pyface"
]
}
]
},
{
"name": "py312-traitsui",
"portdir": "python/py-traitsui",
"version": "8.0.0",
"license": "BSD and GPL-2",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/traitsui",
"description": "The Enthought traitsui package",
"long_description": "The traitsui project contains a toolkit-independent GUI abstraction layer, which is used to support the visualization features of the Traits package.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py312-build",
"py312-setuptools",
"py312-wheel",
"clang-17",
"py312-installer"
]
},
{
"type": "lib",
"ports": [
"py312-pyface",
"python312"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py312-apptools",
"py-traitsui",
"py312-mayavi"
]
}
]
},
{
"name": "py311-traitsui",
"portdir": "python/py-traitsui",
"version": "8.0.0",
"license": "BSD and GPL-2",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/traitsui",
"description": "The Enthought traitsui package",
"long_description": "The traitsui project contains a toolkit-independent GUI abstraction layer, which is used to support the visualization features of the Traits package.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py311-installer",
"py311-wheel",
"clang-17",
"py311-build",
"py311-setuptools"
]
},
{
"type": "lib",
"ports": [
"py311-pyface",
"python311"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py311-apptools",
"py311-mayavi"
]
}
]
},
{
"name": "py310-traitsui",
"portdir": "python/py-traitsui",
"version": "8.0.0",
"license": "BSD and GPL-2",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/traitsui",
"description": "The Enthought traitsui package",
"long_description": "The traitsui project contains a toolkit-independent GUI abstraction layer, which is used to support the visualization features of the Traits package.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py310-wheel",
"py310-installer",
"clang-17",
"py310-setuptools",
"py310-build"
]
},
{
"type": "lib",
"ports": [
"py310-pyface",
"python310"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py310-apptools",
"py310-mayavi"
]
}
]
},
{
"name": "py312-pyface",
"portdir": "python/py-pyface",
"version": "8.0.0",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/pyface",
"description": "The Enthought pyface package",
"long_description": "The pyface project contains a toolkit-independent GUI abstraction layer, which is used to support the visualization features of the Traits package.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"pyside",
"pyqt5"
],
"dependencies": [
{
"type": "build",
"ports": [
"py312-wheel",
"clang-17",
"py312-build",
"py312-installer",
"py312-setuptools"
]
},
{
"type": "lib",
"ports": [
"python312",
"py312-pygments",
"py312-importlib-metadata",
"py312-pyqt5",
"py312-traits"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-pyface",
"py312-traitsui"
]
}
]
},
{
"name": "py311-pyface",
"portdir": "python/py-pyface",
"version": "8.0.0",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/pyface",
"description": "The Enthought pyface package",
"long_description": "The pyface project contains a toolkit-independent GUI abstraction layer, which is used to support the visualization features of the Traits package.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"pyside",
"pyqt5"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-17",
"py311-build",
"py311-installer",
"py311-setuptools",
"py311-wheel"
]
},
{
"type": "lib",
"ports": [
"python311",
"py311-importlib-metadata",
"py311-pygments",
"py311-pyqt5",
"py311-traits"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py311-traitsui"
]
}
]
},
{
"name": "py310-pyface",
"portdir": "python/py-pyface",
"version": "8.0.0",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/pyface",
"description": "The Enthought pyface package",
"long_description": "The pyface project contains a toolkit-independent GUI abstraction layer, which is used to support the visualization features of the Traits package.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"pyside",
"pyqt5"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-17",
"py310-setuptools",
"py310-wheel",
"py310-build",
"py310-installer"
]
},
{
"type": "lib",
"ports": [
"python310",
"py310-pygments",
"py310-importlib-metadata",
"py310-pyqt5",
"py310-traits"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py310-traitsui"
]
}
]
},
{
"name": "py311-mayavi",
"portdir": "python/py-mayavi",
"version": "4.8.2",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/mayavi",
"description": "The Enthought mayavi package",
"long_description": "3D Scientific Data Visualization and Plotting using VTK as the rendering backend and pyqt5/pyqt4/pyside2 for the (G)UI.",
"active": true,
"categories": [
"devel",
"graphics",
"math",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py311-build",
"py311-installer",
"py311-setuptools",
"py311-wheel",
"py311-sphinx"
]
},
{
"type": "lib",
"ports": [
"vtk",
"python311",
"py311-numpy",
"py311-apptools",
"py311-envisage",
"py311-traitsui"
]
}
],
"depends_on": []
},
{
"name": "py312-mayavi",
"portdir": "python/py-mayavi",
"version": "4.8.2",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/mayavi",
"description": "The Enthought mayavi package",
"long_description": "3D Scientific Data Visualization and Plotting using VTK as the rendering backend and pyqt5/pyqt4/pyside2 for the (G)UI.",
"active": true,
"categories": [
"devel",
"graphics",
"math",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py312-build",
"py312-installer",
"py312-setuptools",
"py312-wheel",
"py312-sphinx"
]
},
{
"type": "lib",
"ports": [
"vtk",
"python312",
"py312-numpy",
"py312-apptools",
"py312-envisage",
"py312-traitsui"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-mayavi"
]
}
]
},
{
"name": "py310-mayavi",
"portdir": "python/py-mayavi",
"version": "4.8.2",
"license": "BSD",
"platforms": "darwin",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/mayavi",
"description": "The Enthought mayavi package",
"long_description": "3D Scientific Data Visualization and Plotting using VTK as the rendering backend and pyqt5/pyqt4/pyside2 for the (G)UI.",
"active": true,
"categories": [
"devel",
"graphics",
"math",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [
"universal"
],
"dependencies": [
{
"type": "build",
"ports": [
"clang-18",
"py310-setuptools",
"py310-wheel",
"py310-build",
"py310-sphinx",
"py310-installer"
]
},
{
"type": "lib",
"ports": [
"vtk",
"python310",
"py310-numpy",
"py310-apptools",
"py310-envisage",
"py310-traitsui"
]
}
],
"depends_on": []
},
{
"name": "py312-envisage",
"portdir": "python/py-envisage",
"version": "7.0.3",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/envisage",
"description": "The Enthought envisage package",
"long_description": "Envisage is a Python-based framework for building extensible applications, that is, applications whose functionality can be extended by adding plug-ins. Envisage provides a standard mechanism for features to be added to an application, whether by the original developer or by someone else.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py312-installer",
"py312-wheel",
"clang-18",
"py312-build",
"py312-setuptools"
]
},
{
"type": "lib",
"ports": [
"py312-apptools",
"python312"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py-envisage",
"py312-mayavi"
]
}
]
},
{
"name": "py311-envisage",
"portdir": "python/py-envisage",
"version": "7.0.3",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/envisage",
"description": "The Enthought envisage package",
"long_description": "Envisage is a Python-based framework for building extensible applications, that is, applications whose functionality can be extended by adding plug-ins. Envisage provides a standard mechanism for features to be added to an application, whether by the original developer or by someone else.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py311-installer",
"py311-wheel",
"clang-18",
"py311-build",
"py311-setuptools"
]
},
{
"type": "lib",
"ports": [
"py311-apptools",
"python311"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py311-mayavi"
]
}
]
},
{
"name": "py310-envisage",
"portdir": "python/py-envisage",
"version": "7.0.3",
"license": "BSD",
"platforms": "{darwin any}",
"epoch": 0,
"replaced_by": null,
"homepage": "https://github.com/enthought/envisage",
"description": "The Enthought envisage package",
"long_description": "Envisage is a Python-based framework for building extensible applications, that is, applications whose functionality can be extended by adding plug-ins. Envisage provides a standard mechanism for features to be added to an application, whether by the original developer or by someone else.",
"active": true,
"categories": [
"devel",
"python"
],
"maintainers": [
{
"name": "jjstickel",
"github": "jjstickel",
"ports_count": 168
}
],
"variants": [],
"dependencies": [
{
"type": "build",
"ports": [
"py310-wheel",
"py310-installer",
"clang-18",
"py310-setuptools",
"py310-build"
]
},
{
"type": "lib",
"ports": [
"py310-apptools",
"python310"
]
}
],
"depends_on": [
{
"type": "lib",
"ports": [
"py310-mayavi"
]
}
]
}
]
}